M2 torx countersunk stainless steel screws - Discount & Quotes

I source M2 torx countersunk stainless steel screws that meet tight tolerances for electronics, medical devices, and precision assemblies. The M2 size with a flat countersunk head sits flush for clean enclosures, while the Torx drive gives reliable torque without cam-out. Made from stainless steel, these screws resist corrosion in demanding environments and give long-lasting durability. I stock a range of finish and thread lengths to fit board-to-board, panel, and chassis applications. If you’re comparing, I can offer Discount for bulk orders and provide fast, accurate Quotes to keep your production line moving. Packaging is sensible for OEMs—tightly counted, easy to inventory. I know your procurement team wants consistency, excellent hold, and predictable lead times, so I keep a steady supply and quick response on quantities. Tell me your required length, thread, and quantity, and I’ll tailor the best option for your project.

Hot Selling Product

M2 torx countersunk stainless steel screws Sets the Industry Standard Outperforms the Competition

Designed for compact devices, M2 Torx countersunk stainless steel screws set a new benchmark in precision fasteners. The countersunk head sits flush in panels, delivering a clean finish while saving space for nearby parts. The M2 size and Torx drive reduce cam-out and allow higher torque transfer, increasing assembly reliability in electronics, wearables, and small machinery. Stainless steel provides corrosion resistance and stability through temperature changes, delivering long-term performance. Tight tolerances on thread pitch and head height support consistent assembly across batches. Global buyers benefit from standardized parts, scalable supply, and tool compatibility. These screws can be RoHS-compliant and offered with various finishes and packaging for just-in-time manufacturing. With controlled production and traceability, they help minimize downtime and defects in high-volume lines. For teams seeking industry-grade fasteners that outperform basic options, M2 Torx countersunk stainless steel screws offer reliable torque, flush mounting, and corrosion resistance across electronics, automotive, and industrial applications.

{ M2 torx countersunk stainless steel screws Sets the Industry Standard Outperforms the Competition}

Size	Diameter	Length (mm)	Drive Type	Head Type	Material	Pitch (mm)	Tensile Strength (MPa)	Finish	Corrosion Resistance	Standards	Applications
M2 x 4	M2	4	Torx	Countersunk	A2 (304)	0.40	≥520	Passivated	Excellent indoor/outdoor	ISO 3506-1 Grade 304/304L	Electronics assemblies, enclosures, precision hardware
M2 x 6	M2	6	Torx	Countersunk	A2 (304)	0.40	≥520	Passivated	Excellent indoor/outdoor	ISO 3506-1 Grade 304/304L	Internal components, small fastener assemblies
M2 x 8	M2	8	Torx	Countersunk	A2 (304)	0.40	≥520	Passivated	Good outdoor performance	ISO 3506-1 Grade 304/304L	Panel fastenings, consumer electronics
M2 x 10	M2	10	Torx	Countersunk	A2 (304)	0.40	≥520	Passivated	Excellent indoor/outdoor	ISO 3506-1 Grade 304/304L	Electronic enclosures, lightweight machinery
M2 x 12	M2	12	Torx	Countersunk	A2 (304)	0.40	≥520	Passivated	Excellent indoor/outdoor	ISO 3506-1 Grade 304/304L	Precision assemblies, small brackets
M2 x 16	M2	16	Torx	Countersunk	A4 (316)	0.40	≥520	Passivated	Superior corrosion resistance (marine environments)	ISO 3506-1 Grade 316/316L	Marine electronics, exterior assemblies

Related Products

36-countersunk-head-philip-taping-screw-sharp-point — Stainless steel captive pan head torx screws manufacturer
Read More

Alloy Steel Stainless Steel Cup Point Cone Point Brass Plastic Point Set Screws

black stainless steel socket button head screws — Socket head screws stainless steel fasteners

41-White-paint-round-head-philip-screws — White painted phillips round head A4 stainless steel screws

High quality stainless steel captive screws metric imperial for panel laptop sheet metal plastic assembly

34-1.6-washer-head-self-taping-screw — Phillips washer head stainless steel self tapping screws

phillips-pan-head-captive-screw-stainless-steel-m3-m4.jpg — Phillips pan head captive panel screws stainless steel

M2 torx countersunk stainless steel screws Is The Best Ahead of the Curve

Data Dimension: Treatment Types and Pull-Out Strength for M2 Torx Countersunk Stainless Steel Screws

Explanation (approx. 300 words): This chart compares five common surface or finish options for M2 Torx countersunk stainless steel screws in terms of average pull-out strength, a key indicator of mechanical reliability in fixed installations. The categories shown are Untreated, Passivated, Electropolished, Black Oxide, and Zinc Plated. The data points are illustrative and intended to demonstrate how surface engineering can influence performance under load, not to substitute for lab-tested values. In this dataset, Electropolished screws achieve the highest pull-out strength, around 410 N, followed closely by Passivated at about 370 N and Zinc Plated at roughly 360 N. The Untreated option sits lower, near 320 N, emphasizing that surface finishing can materially improve resistance to extraction forces. Black Oxide, often chosen for appearance or corrosion resistance rather than maximum strength, records the lowest estimate here, about 290 N, potentially due to coating thickness and friction characteristics affecting the seat and contact area. The observed trend highlights a trade-off between corrosion protection, friction behavior, and structural engagement. Treatments like Passivation primarily enhance corrosion resistance with modest strength benefits, while Electropolishing improves surface finish and contact uniformity, producing higher strength results. Zinc Plating can offer reasonable protection with only a minor impact on strength, whereas Black Oxide may provide aesthetics or protection but with a compromise in pull-out performance under high torque. For product development and procurement decisions, these insights suggest prioritizing electropolished or passivated finishes when maximum load-bearing reliability is required, especially in applications where countersunk seating and torque control are critical. Real-world testing should validate these patterns across materials, hole diameters, and substrates to ensure robust, repeatable performance in end-use conditions.

Top Selling Products

Related Blog
Reviews
Reviews

2026 Best Insert Nut Solutions for Global Buyers?

In the fast-evolving world of manufacturing, Insert Nuts play a crucial role in enhancing product assemblies. As per recent industry reports, the
What Are the Best Button Screws for Global Procurement?

In the realm of global procurement, the selection of the right Button Screw is crucial. Experts like John Carter, a renowned specialist at Fastener
Top 10 Screws Buyers Should Know for Quality Procurement?

In the world of manufacturing, selecting the right screws is crucial. John Smith, a leading expert at Precision Fasteners, states, “Quality screws
Best Phillips Flat Head Screw Options for Global Buyers?

In the competitive landscape of fasteners, the “Phillips Flat Head Screw” stands out as a staple in various applications. James Thompson, a

Hazel 2022.12.28 11:25:10
The manufacturer gave us a big discount under the premise of ensuring the quality of products, thank you very much, we will select this company again.
Gary 2022.12.26 11:21:57
This company has a lot of ready-made options to choose and also could custom new program according to our demand, which is very nice to meet our needs.
Nick 2022.12.09 20:54:00
Cooperate with you every time is very successful, very happy. Hope that we can have more cooperation!
Elma 2022.12.04 12:28:31
The company's products very well, we have purchased and cooperated many times, fair price and assured quality, in short, this is a trustworthy company!
Olga 2022.12.04 11:43:50
As a veteran of this industry, we can say that the company can be a leader in the industry, select them is right.
Eartha 2022.12.02 16:15:13
We have been engaged in this industry for many years, we appreciate the work attitude and production capacity of the company, this is a reputable and professional manufacturer.

Joanne 2022.12.29 18:59:24

The factory technical staff gave us a lot of good advice in the cooperation process, this is very good, we are very grateful.
Adelaide 2022.12.28 05:40:16

In China, we have many partners, this company is the most satisfying to us, reliable quality and good credit, it is worth appreciation.
Rita 2022.12.25 09:14:16

Adhering to the business principle of mutual benefits, we have a happy and successful transaction, we think we will be the best business partner.
Alexia 2022.12.15 22:31:13

Customer service staff and sales man are very patience and they all good at English, product's arrival is also very timely, a good supplier.
Tyler Larson 2022.12.10 05:47:52

A nice supplier in this industry, after a detail and careful discussion, we reached a consensus agreement. Hope that we cooperate smoothly.
Judy 2022.12.07 12:35:12

Goods just received, we are very satisfied, a very good supplier, hope to make persistent efforts to do better.