Lathe CNC Machining Brass CNC Milling Parts for OEM Suppliers

We produce lathe cnc machining brass cnc milling parts with tight tolerances and reliable performance. Our team handles precision turning, multi-axis milling, wire EDM, and secondaries on brass alloys to deliver components that fit your assemblies every time. We work with your blueprints, or we can help optimize designs for manufacturability, reducing cost and lead times. We stock brass bars and use high-grade tooling to ensure smooth finishes and accurate sizes. Typical tolerances ±0.05 mm, surface finishes from 0.4 microns Ra depending on geometry. Our commitment to quality is backed by strict inspection, 100% FAI on critical parts. We offer flexible MOQs and rapid prototyping, so OEM and Suppliers can scale up or down as demand shifts. Partner with us for reliable supply of lathe cnc machining brass cnc milling parts that meet industry standards and your exact spec, with competitive pricing and dependable delivery.

Hot Selling Product

lathe cnc machining brass cnc milling parts Supplier Dominates

In the brass components segment, a leading lathe and CNC milling supplier combines precision turning with high‑speed milling and in‑house finishing to deliver interchangeable parts. Brass’s machinability and conductivity suit electrical connectors, fittings, and decorative hardware, while strict process control yields tight tolerances (often ±0.05 mm) and consistent surface quality across multiple part numbers. Advanced tooling and repeatable workflows support high‑mix, moderate‑volume production with minimal deviation. Global buyers benefit from scalable capacity, rapid prototyping, and rigorous quality assurance. In‑house metrology, batch traceability, and standardized inspection ensure each lot meets specs before shipment. Value‑added services such as deburring, polishing, plating, and passivation can reduce lead times and streamline the supply chain, while RoHS/REACH compliance and proper documentation support international procurement. A capable brass CNC partner with strong logistics and proactive communication can align production with demand, optimizing cost, quality, and delivery in global programs.

{ lathe cnc machining brass cnc milling parts Supplier Dominates}

Part ID	Material	Machining Process	Dimensions (Dia × L, mm)	Tolerance (mm)	Surface Finish (Ra, μm)	CNC Time (hrs)	Machine Type	Operations	Finishing	Heat Treatment	Lead Time (days)	Certification	Country of Origin	Quality Pass Rate (%)	Notes
BR-1001	C26000 Brass	Lathe turning & CNC milling	28 × 60	±0.05	0.8	2.5	5-axis CNC Lathe & 3-axis Milling	Turning, Milling, Drilling	Polished	Annealed	5	RoHS, ISO 9001	Germany	99.6	High-precision hydraulic fittings
BR-1002	C26000 Brass	Lathe turning	16 × 40	±0.03	0.6	1.8	CNC Lathe	Turning, Grooving	Polished	None	4	RoHS	Italy	99.2	Small diameter bushing
BR-1003	C26000 Brass	Lathe turning & milling	48 × 100	±0.04	0.9	4.2	CNC Lathe + Milling	Turning, Drilling, Milling	Polished	Annealed	7	ISO 9001	Spain	98.9	Large diameter shaft
BR-1004	C26000 Brass	CNC Lathe	12 × 25	±0.02	0.7	1.0	CNC Lathe	Turning	Polished	None	3	RoHS	USA	99.5	Miniature connector plug
BR-1005	C26000 Brass	CNC Milling	60 × 90	±0.03	0.8	3.5	CNC Milling	Milling, Drilling	Polished	Annealed	6	ISO 9001	Germany	99.1	Bracket plate for valve assembly
BR-1006	C26000 Brass	CNC Lathe	40 × 60	±0.05	1.0	2.3	CNC Lathe	Turning, Grooving	Brushed	None	5	RoHS	Japan	98.7	Housing for fasteners
BR-1007	C26000 Brass	CNC Milling	20 × 20	±0.01	0.4	1.0	CNC Milling	Milling	Mirror polished	Annealed	4	ISO 9001	Sweden	99.8	Precision knob

Related Products

O1CN01tyE5tU2IFlC4Y5p7W_!!4087939257-0-cib — high precision low price custom metal cnc milling machining lathing parts
Read More

aluminum milling turning service CNC machining parts

custom cnc parts service anodized aluminum metal cnc machining milling

brass cnc turned part — CNC Machining Parts cnc milling machine spare parts

aluminum parts milling cnc machining services

lathe cnc machining brass cnc milling parts Pioneers in the Field Exceeds Industry Benchmarks

Data Dimension: Machining Efficiency Across Process Stages

This chart displays data dimension: Machining Efficiency Across Process Stages. Each bar indicates a stage’s efficiency percentage derived from comparing actual productive time to the theoretical cycle time during brass CNC machining. The six stages represented are Raw Material Prep, Turning, Milling, Drilling, Finishing, and Quality Check. The values chosen (78, 85, 92, 88, 95, 90) reveal where efficiency is highest and where improvement is needed. Finishing shows the strongest performance at about 95%, followed closely by Milling and Quality Check, while Raw Material Prep trails at around 78%, signaling a potential bottleneck in the early phase of the process. The differences among stages illustrate how variability in setup, tool changes, and handling can impact overall throughput. High performance in Milling and Finishing suggests effective process control, precise programming, and stable tooling conditions. Conversely, the relatively lower efficiency in Raw Material Prep may be related to inconsistent material conditioning, loading times, or fixture alignment. Addressing these early-stage bottlenecks—perhaps via standardized fixtures, improved loading automation, or pre-programmed setup sheets—could yield disproportionate gains in total cycle time and production capacity. The chart serves as a baseline for continuous improvement: upping Raw Material Prep efficiency by even a few percentage points can reduce downstream idle time and reduce scrap from misfeeds. Through data-driven adjustments, this operation could consistently surpass industry benchmarks in brass CNC milling. The visualization can be extended to include more metrics like cycle time, scrap rate, and energy consumption, offering a holistic view of manufacturing performance.

Top Selling Products

Related Blog
Reviews
Reviews

2026 Best Insert Nut Solutions for Global Buyers?

In the fast-evolving world of manufacturing, Insert Nuts play a crucial role in enhancing product assemblies. As per recent industry reports, the
What Are the Best Button Screws for Global Procurement?

In the realm of global procurement, the selection of the right Button Screw is crucial. Experts like John Carter, a renowned specialist at Fastener
Top 10 Screws Buyers Should Know for Quality Procurement?

In the world of manufacturing, selecting the right screws is crucial. John Smith, a leading expert at Precision Fasteners, states, “Quality screws
Best Phillips Flat Head Screw Options for Global Buyers?

In the competitive landscape of fasteners, the “Phillips Flat Head Screw” stands out as a staple in various applications. James Thompson, a

Alva 2022.12.20 08:13:27
Product variety is complete, good quality and inexpensive, the delivery is fast and transport is security, very good, we are happy to cooperate with a reputable company!
Christopher Mabey 2022.12.11 22:17:44
A good manufacturers, we have cooperated twice, good quality and good service attitude.
Matthew 2022.12.08 11:47:36
The customer service staff's answer is very meticulous, the most important is that the product quality is very good, and packaged carefully, shipped quickly!
Eudora 2022.12.07 13:57:14
The factory workers have rich industry knowledge and operational experience, we learned a lot in working with them,we are extremely grateful that we can encount a good company has excellent wokers.
Joyce 2022.12.07 08:05:21
Factory equipment is advanced in the industry and the product is fine workmanship, moreover the price is very cheap, value for money!
Jessie 2022.12.05 04:48:07
This is a very professional and honest Chinese supplier, from now on we fell in love with the Chinese manufacturing.

Nora 2022.12.28 14:15:42

This company has the idea of better quality, lower processing costs, prices are more reasonable, so they have competitive product quality and price, that's the main reason we chose to cooperate.
ron gravatt 2022.12.16 10:56:03

On this website, product categories is clear and rich, I can find the product I want very quickly and easily, this is really very good!
Marco 2022.12.15 11:10:58

This company has a lot of ready-made options to choose and also could custom new program according to our demand, which is very nice to meet our needs.
Megan 2022.12.13 03:54:14

It's really lucky to find such a professional and responsible manufacturer, the product quality is good and delivery is timely, very nice.
Martin Tesch 2022.12.11 07:52:04

The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!
Kevin Ellyson 2022.12.05 23:46:30

We have been cooperated with this company for many years, the company always ensure timely delivery ,good quality and correct number, we are good partners.