English
banner (1)

ANSI cross slotted head screw - China Manufacturer

As a China-based Manufacturer, we offer the ANSI cross slotted head screw that engineers trust for secure, clean drives in machinery, electronics, and metalworking. Crafted from high-grade steel with optional stainless steel, our fasteners feature tight tolerances, corrosion resistance, and durable heat treatment to ensure long service life under industrial loads. The cross slotted head allows easy driving with common screwdrivers, while the precise head geometry minimizes cam-out in high-volume production. We provide multiple finishes, lengths, and thread pitches to match your specs, and we can customize to meet your exact requirements. With strict QC and scalable production, we can support bulk orders with reliable lead times and consistent supply. Whether you’re in automotive, appliance, or factory equipment, our ANSI cross slotted head screw delivers consistent performance. Contact us for a quote or to discuss your manufacturing needs today.

Hot Selling Product

ANSI cross slotted head screw Dominates For the Current Year

ANSI cross-slotted head screws are dominating the fastener market this year, driven by electronics, machinery, and consumer appliances. The cross-shaped recess delivers reliable torque transmission and reduced cam-out, enabling faster automated assembly on global lines. Under ANSI guidance, these screws offer interchangeable performance across regions, easing design-in and sourcing for diverse applications. For global procurement, material and finish choices drive long-term reliability. Stainless steels like A2/304 and A4/316 offer corrosion resistance; carbon steel with zinc plating or black oxide covers cost-sensitive indoor use. Sizes range from small to medium, with coarse and fine threads and various drive sizes. Ensure tight tolerances, correct head height, and compatible drivers to minimize downtime. Quality and traceability are essential for international buyers. Look for ISO 9001, documented QC, and data on hardness, torque, and plating. Practical packaging, lead times, and flexible MOQs help stabilize global supply. A diversified sourcing strategy with robust QA enables predictable cost, consistent performance, and faster time-to-market.

{ ANSI cross slotted head screw Dominates For the Current Year}
Dimension Nominal Size Diameter (mm) Length (mm) Pitch (mm) Material Finish Head Diameter (mm) Tensile Strength (MPa) Drive Type Standard Primary Application
Machine Screw M3 3.0 6 0.50 Carbon Steel Zinc 5.0 520 PH (Phillips) ANSI/ASME B18.6.3 Electronics assembly
Machine Screw M3 3.0 8 0.50 Stainless Steel A2-70 Passivated 5.0 520 PH (Phillips) ANSI/ASME B18.6.3 Medical devices
Machine Screw M4 4.0 6 0.70 Carbon Steel Zinc 6.0 600 PH (Phillips) ANSI/ASME B18.6.3 General machinery
Machine Screw M4 4.0 8 0.70 Stainless Steel A2-70 Passivated 6.0 520 PH (Phillips) ANSI/ASME B18.6.3 Food equipment
Machine Screw M5 5.0 10 0.80 Carbon Steel Black Oxide 7.0 620 PH (Phillips) ANSI/ASME B18.6.3 Automotive interior
Machine Screw M5 5.0 12 0.80 Stainless Steel A2-70 Passivated 7.0 520 PH (Phillips) ANSI/ASME B18.6.3 Appliance assembly
Machine Screw M6 6.0 12 1.00 Carbon Steel Zinc 9.0 650 PH (Phillips) ANSI/ASME B18.6.3 Machinery
Machine Screw M6 6.0 16 1.00 Stainless Steel A2-70 Passivated 9.0 520 PH (Phillips) ANSI/ASME B18.6.3 Electronics chassis
Machine Screw M8 8.0 20 1.25 Carbon Steel Zinc 11.0 700 PH (Phillips) ANSI/ASME B18.6.3 Heavy equipment
Machine Screw M8 8.0 25 1.25 Stainless Steel 316 Passivated 11.0 580 PH (Phillips) ANSI/ASME B18.6.3 Marine electronics
Machine Screw M10 10.0 30 1.50 Carbon Steel Zinc 14.0 720 PH (Phillips) ANSI/ASME B18.6.3 Industrial machinery
Machine Screw M10 10.0 40 1.50 Stainless Steel 304 Passivated 14.0 520 PH (Phillips) ANSI/ASME B18.6.3 Food-grade equipment

Related Products

2self-sealing-screw-truss-head-slot-with-or-o-ring

Brass Slotted Cheese Head Machine Screws M2*8mm M2*12mm

Read More
1R8A2577

Slotted Flat Head Machine Screws Fastener Factory

88

Slotted flat head machine screw supply

48-Indented-Hex-Head-Slotted-PT-screw

Indented hex head slotted PT 2# stainless steel screws

m3.5 x 25mm slotted flat countersunk machine screw

countersunk flat head slotted machine screws

IMG_0609

China Fasteners Custom brass head slotted screw

IMG_0458

High Precision Brass Cylindrical Head Slotted Set Screw

banner (4)

ANSI cross slotted head screw Stands Out Sets the Industry Standard

Data Dimension: Adoption Rate by Material Type for Cross-Slotted Head Screws (2020-2025)

Cross-Slotted Head Screw Material Adoption Over Time

Stainless Steel Carbon Steel Alloy Steel Aluminum
The following explanation accompanies the chart and provides context for the observed trends in material adoption among ANSI cross-slotted head screws from 2020 through 2025. Adoption rate here is conceptualized as the share of total cross-slotted head screw production or usage attributed to each material category within a given year, reflecting material performance, cost, and end-use requirements rather than a strict taxonomy of total market size. The data illustrate relative penetration: stainless steel, with its corrosion resistance and high strength, shows a pronounced upward trajectory, increasing from about 25% in 2020 to around 50% by 2025. Carbon steel also rises steadily, moving from roughly 20% to the high 30s. Alloy steel grows more rapidly after 2022, climbing from around 10% to about 30% by 2025, highlighting growing demand for higher-strength components in demanding applications. Aluminum starts lower, around 5%, but gradually increases to the mid-teens by 2025, indicating niche segments where weight reduction is paramount or where cost constraints favor lighter alloys. Several factors influence these trajectories, including material properties (strength-to-weight ratios, corrosion resistance), manufacturing tolerances and treatability, supply chain considerations, and price volatility. The chart’s range (0–60%) is chosen to visualize trends clearly, though real-world data would require verification and may be influenced by regional standards and application sectors (construction, automotive, electronics, etc.). This visual also hints at potential gaps where material performance is needed but not yet achieved at acceptable cost. In future analyses, layering these shares as a stacked representation or incorporating market size data could provide a more comprehensive view of total demand and allow direct comparison of material contributions year over year. Additionally, incorporating regional breakdowns and tolerance classifications could deepen insights for procurement and design optimization.

Top Selling Products

  • Related Blog
  • Reviews
  • Reviews

  • Sarah 2022.12.25 19:17:15

    This manufacturer can keep improving and perfecting products and service, it is in line with the rules of market competition, a competitive company.

  • Faithe 2022.12.11 10:36:32

    Speaking of this cooperation with the Chinese manufacturer, I just want to saywell dodne, we are very satisfied.

  • Maria 2022.12.10 02:34:21

    The goods are very perfect and the company sales manager is warmful, we will come to this company to purchase next time.

  • Isabel 2022.12.08 10:51:52

    The manufacturer gave us a big discount under the premise of ensuring the quality of products, thank you very much, we will select this company again.

  • Gabrielle 2022.12.07 21:39:17

    Although we are a small company, we are also respected. Reliable quality, sincere service and good credit, we are honored to be able to work with you!

  • Kimberley 2022.12.06 00:44:17

    Product variety is complete, good quality and inexpensive, the delivery is fast and transport is security, very good, we are happy to cooperate with a reputable company!

  • Jessie 2022.12.25 09:12:41

    The company account manager has a wealth of industry knowledge and experience, he could provide appropriate program according our needs and speak English fluently.

  • Candance 2022.12.20 21:22:25

    The goods are very perfect and the company sales manager is warmful, we will come to this company to purchase next time.

  • Rosemary 2022.12.17 08:09:15

    Sales manager is very enthusiastic and professional, gave us a great concessions and product quality is very good,thank you very much!

  • Jocelyn 2022.12.13 05:53:12

    Products and services are very good, our leader is very satisfied with this procurement, it is better than we expected,

  • Modesty 2022.12.12 11:00:51

    This company can be well to meet our needs on product quantity and delivery time, so we always choose them when we have procurement requirements.

  • Penelope 2022.12.10 18:42:51

    The company comply with the contract strict, a very reputable manufacturers, worthy a long-term cooperation.

related search

Hit enter to search or ESC to close